Adopts third-generation semiconductor silicon carbide (SiC) technology to create a 4U 6kVA high-performance AC/DC power source with high power density

AC input supports single-phase and three-phase, phase voltage 200V to 240V±10% (Delta or Y connection)

10 output modes: including external input signal frequency and mains synchronization (SYNC), external voltage controlled internal amplifier output (VCA)

Multi-channel output function

Supports 1P2W, 1P3W, 3P4W output

Wide Test Frequency：
-- LCR-8200A:DC, 10Hz~50/30/20/10/5 MHz
-- LCR-8200:DC, 10Hz~30/20/10/5/1 MHz

7" LCD color Display

0.08% Basic Accuracy

Displaying Four Measurement Results Simultaneously From 17 Selectable Measurement Parameters Freely

15 Steps List Measurement

Two Curves Sweep Mode

Equivalent Circuit Model Analysis (LCR-8200A only)

Internal DC Bias Voltage ±12V

USB Storage Available

Large 4.3”TFT color display

3-slot mainframes with built-in 6 ½ digit DMM

Basic 0.0035% DCV accuracy

5 selectable switch modules

Up to DC 600V / AC 400V voltage measurement (DAQ-909 module)

Up to 450 channel/s scan rate

Up to 100 kilo points internal memory

Measures and converts 14 different input signals

Temperature with thermocouple, RTDs and thermistor; dc/ac volts; 2- and 4-wire resistance; frequency and period; dc/ac current and capacitance; direct strain and bridge strain

USB storage support to copy/log data in standalone operation

Interface: Digit I/O, LAN, USB host/device and mini GPIB(optional)

GW Instek PEL-5000G series single-channel electronic load provides 150V/ 600V/ 1200V models with a power range of 4kW~6kW. PEL-5000G has a total of 9 models featuring different combinations of power, voltage, and current. It can test and verify the specifications of batteries, electric vehicle chargers/charging stations and electric vehicle batteries. PEL-5000G supports parallel connection for same voltage specification and different power models. PEL-5000G can support up to 8 units connected in parallel to provide a maximum power of 48kW.

The PEL-2004A and PEL-2002A are multiple channel, programmable DC electronic loads with a modularized structure.

The new PEL-3000E series programmable single-channel electronic load. In the series, PEL-3031E provides 300W (1V~150V/60A) and PEL-3032E provides 300W(2.5V~500V/15A) current sink capability. Inherited from the PEL-3000 series, PEL-3000E has an easy-to-read LCD panel and user-friendly interface. This model features high speed and accurate measurement capability for electronic component, battery, portable charger and power products that require low to medium power consumption.

GWInstek introduces APS-7000 series programmable AC power sources, which consists of 500VA of APS-7050, 1000VA of APS-7100, 2000VA of APS-7200 and 3000VA of APS-7300. APS-7000 series features power characteristics from its linear structure design including low noise, low THD, and highly stabilized power output that are ideal for the product development and verification of input power with low noise requirement or stereo, video and audio device applications, etc.

The ASR-3000 series is an AC+DC power source, featuring high-speed DC voltage rising and falling time (≦100us).

ASR-3000 is ideal for the development of On-board Chargers, Server Powers, LED modules, AC Motors, AC Fans, UPS, and various electronic components, as well as for testing applications of automotive electrical equipment and home appliances.

There are four models of the series:
1. ASR-3200(2kVA)
2. ASR-3300(3kVA)
3. ASR-3400(4kVA)
4. ASR-3400HF(4kVA, Frequency upto 5kHz)

PSW-Multi series is a dual-channel or triple-channel wide range output programmable switching DC power supply.

The maximum output power can reach 1080W.

There are 13 dual-channel models with a rated power of 720W, and 24 triple-channel models with a rated power of 1080W.

The rated voltages of low voltage modules are 30V, 40V, 80V, 160V.

The rated voltages of high voltage modules are 250V and 800V.

GW Instek GSM-20H10 is a precision source measure unit that provides highly stable DC power and instrument-grade 6½-digit multimeter measurements. GSM-20H10 provides four-quadrant operation of ±210V/±1.05A/22W. The first and third quadrants operate as power supplies to supply power to the load. The second and fourth quadrants function as loads to consume power internally. Voltage value, current value and resistance value can be measured while operating the power supply or load function with an accuracy of 0.012% and a resolution of 1µV/10pA/10µΩ.

The GSP-9330 is a high test speed spectrum analyzer with 3.25 GHz, provides the fastest 204 μs sweep speed. It also has incorporated the EMC pretest solution to facilitate EMC tests. The simple and easy EMC pretest procedures from GSP-9330 can tremendously shorten users' product launch timeline

The GDS-3000A series is the flagship product of GW Instek's new generation digital storage oscilloscope. Its highest frequency bandwidth has been elevated to 650MHz, and the 350MHz model is also available. The memory depth of each channel is up to 200Mpts. GDS-3000A is equipped with a standard dual-channel 25MHz arbitrary waveform generator. Users can select the arbitrary waveform function to store the signal measured by the analog channel or directly output it from the signal generator.

GW Instek introduces the flagship model (500VA output capacity) safety analyzer-the GPT-15000 series, which is the first safety analyzer in the world to comply with IEC 61010-2-034

4.3” TFT LCD Display

Programming resolution: 1mV/ 0.2mA (GPP-3610H); 2mV/0.2mA (GPP-7250)

Readback resolution: 0.1mV/ 0.1mA

Low ripple noise: ≦ 1mVrms / ≦2mArms

Transient response time: ≦100us

Load function (CC, CV, CR mode)

Utilizes hardware to realize over voltage protection / over current protection / over temperature protection

Delay function/output monitoring function /output recorder function

Supports setting value, measurement value and output waveform display

Sequential output function and 8 built-in template waveforms

The output recorder function records the output voltage & current parameters with a minimum recording interval of 1 second

Sequence/delay/recorder/panel setting conditions respectively provide 10 sets of internal storage memory

Intelligent temperature-controlled fan effectively reduces noise

Standard interface: LAN, RS-232, USB, Ext I/O

Optional interface (manufacturer installed only): GPIB